How do I Reset my NETGEAR Router?

How do I Reset my NETGEAR Router?

People usually reset their routers when it fails to work adequately. If you are facing a similar issue, fret not, as the answer is within your reach. If your router is not working properly or worse, you don’t remember your password to connect; it is time to reset your router with the valuable insights given in this blog. It is normal to come across technical issues, which is why if you come across some problems with your Netgear Router, feel free to reach out to Netgear customer service for step-by-step guidance.

In case your wi-fi card fails to get detected, you should reset your router. This problem takes place when network drivers are not installed properly. The spot where you placed your router may not receive an adequate signal. It is one of the primary reasons why your router might not work. Hardware problems also may be the root cause of this problem. In case any operating system corruption has taken place, the router ceases to function properly. Let’s discuss the common issues faced by Netgear below before we jump to the how-to reset Netgear Router issue.

Common Issues of Netgear:

  • There may be a problem in fitting the wi-fi card properly.
  • The Netgear router may be switched off.
  • The router may fail to function when there is a lack of power supply.
  • The router might get a weak signal, sometimes.
  • There might be a problem connecting to the access page while typing the password.
  • Change the direction of the router in case of weak signals.

Getting to know the common concerns faced by Netgear users will help others in being prepared for them early on. It’s like learning from others’ mistakes is better. Let us take you to a walkthrough on the best methods to reset Netgear Router.

Quick-Fix solutions to Reset the Netgear Router

  • Please make sure you have turned on the router before resetting it.
  • Move your router to the other side to make you face the backside of the router.
  • Find your Reset button to enable resetting your router to its previous settings.
  • Try using a paper clip to press the reset button and hold the key for a minimum of seven seconds.
  • After this step, you can let go of the button and pause for 7-10 seconds. The router will start to reboot.
  • You will notice the flickering of the Power light as the reset procedure begins.
  • Once the process is finished, the light will stop blinking.
  • The Netgear Router will be reset to the default settings now.

Although, we tried to answer the Netgear-related queries. However, suppose you feel the problem needs to be rectified further. In that case, you can contact the Netgear phone number for detailed guidance from certified experts who are available to resolve your trickiest of concerns with patience and tenacity. They are professionally qualified and highly experienced in solving your technical issues associated with Netgear, so you need not worry anymore. Enjoy your high-speed internet without any hassles, delays, or obstacles.

Why HP Deskjet Printer Won’t Scan?

Why HP Deskjet Printer Won’t Scan?

HP Printer is one of the most popular equipment in the world used to print, scan and copy documents. It uses Thermal Inkjet Printing technology with print speed divided into separate parts such as 7.5PPM for black and white while 16 ppm for Color. HP Printer is used to print, copy and scan documents. This is one must-have printer. If you are facing some issues with the HP printer, please reach out to HP support for complete assistance. 

HP printers are widely used printers. HP is a famous brand among the masses because it’s affordable black and white, accompanied by colored prints that use LaserJet technology. Presently, it is the fastest printer developed by Hewlett-Packard in 1984. It delivers high-quality photos all around the world with well-saturated colors, which result in edged printouts. Yet, sometimes customers face an issue when HP printers start printing blank pages. Users can fix this problem by using simple steps, and in case they are unable to implant those steps. One must not hesitate to connect on the HP customer care.

As you know HP Printer is used for more than just printing purposes such as sending faxes, making copies and scanning documents for storage on any attached computers. Printer handles all the scanning functions using the software installed while you set up the printer on the workstation. When trying to scan, if you see the error “Scanner cannot be Initialized” or “No Scanner” on the computer screen, no need to worry because we have enlisted the solution below:

  1. Quit any of the programs open on your system and reboot your OS. Tap the ‘power’ button on the printer to switch it off as well.
  2. Remove the Printer’s power cord from the printer.  Pause for 5 seconds, try reconnecting the power cord and switch on the printer again.
  3. Start verifying that the USB cable connects the workstation to the printer is safely plugged into both the devices.
  4. Transfer the cable to a USB plug on the system which is compatible with other devices.
  5. Remove the USB cable from the printer only when the system and printer are working. Pause for 5 seconds, plug in the USB cable into the printer.
  6. Go to the ‘Windows or ‘Start’ button and right-click on ‘My Computer’.  Open the tab “Device Manager” and select Imaging Device.
  7. Go to the “All-in-One” option under the category “Imaging Device” and click on the “Remove” button.

This blog has enlisted all the possible solutions to rectify simple problems with HP printers. But in any case, if the problem persists or you are looking for detailed guidance, the certified experts at the HP support number are ready to assist you at your beck and call. You can expect their well-qualified team to guide you step-by-step with patience and handling your trickiest concerns, queries, or doubts with tenacity. Now, enjoy a problem-free HP Printer that functions smoothly with no hassles. Even if there are any technical issues, the highly experienced staff is available to help you resolve any technical issues.

How to Fix Netgear Router DNS Server Not Responding Issue?

How to Fix Netgear Router DNS Server Not Responding Issue?

Netgear profiles and gives an entire future Wi-Fi band. It provides the fastest speed with less congestion. They provide excellent service in the networking market with products for business and home for business and home, including wired and wireless technology. People usually buy Netgear directly because it gives free shipping, a hassle-free return policy, and a simple and secure checkout system. Netgear supports the smooth functioning of DNS servers, but sometimes it stops responding.

DNS is an essential part of setting network configuration. Domain name systems are necessary to convert domain names into IP addresses. Most internet service providers provide a  DNS server address automatically to the router addition to this, Netgear router DNS Server is giving a Supreme facility to its customer. 

But sometimes, users face issues while trying to configure the router to use another DNS server. The best resolution for this type of error is that the user needs to access the router’s web configuration. This is only possible by logging in to your router, followed by opening the internet setup page.

This blog read some resolution to this problem, but if this issue is not resolved after applying this step, the user can call the Netgear support number to have an advanced solution.

Solution 1- To use another DNS system, it is essential to configure a workstation

  • The first step is to go on the control panel of the workstation
  • Now from the network setting option, select the network connection that is suggesting an opportunity for a DNS issue
  • Now move to adaptors TCP/IP properties
  • Finally, carefully add the DNS server with the appropriate address provided by ISP

Solution 2- To use alternative DNS to configure the router to have the best results

  • Now go on web router configuration and access according to the requirements
  • The next step is to go on basic settings and select use these DNS servers
  • Now with total concentration and the correct DNS address given by ISP
  • The final step is to click on apply to complete the process

I hope this blog helps you and you can resolve Netgear router DNS not responding issues, and users must note the exact steps to configure and fix the Netgear DNS Server issue. If you have any trouble configuring your workstation, you can call the Netgear customer service number and ask for help. The experts are available in their customer’s service round the clock and will give assured best assistance.

How to Connect Canon Printer with Mac?

How to Connect Canon Printer with Mac?

Mac uses IOS, and it uses a bit different procedure to add a canon printer. As Canon is providing superior Japanese printing technology to its users, but sometimes users face problems while connecting Canon Printer to Mac. Readers are advised to read this complete blog to have the best and quick hacks to connect Canon printers to Mac. In case users face any technical issue, they can freely contact Canon customer care and talk to experts regarding any problem users face while connecting Canon printer with macOS.

It is important to note that macOS uses AirPrint and connects printers or automatically downloads it from the printer’s driver. It is advised not to install the printer’s software and follow appropriate instructions when the user is trying to link the printer with Mac. Don’t worry, If in case, MacOS need the latest software download, a notification will pop up to indicate the same.

  • Adding USB printer to macOS

Most USB printers are easy to install. Update the software and connect via USB port. macOS will download the required software and will get connected. Sometimes it will need your help to complete the process. 

  1. To update software: If you see a message that this software doesn’t support the printer, go to Apple menu>system >preferences > software update. 
  2. Prepare the printer to connect: Follow the steps given in the manual and bring it to working condition. 
  3. Connecting: Connect the printer by attaching the USB cable to Mac. Download the software if required. Multiport adaptors will increase efficiency.
  • Addition of Wifi or network printer

To check the Wifi Connectivity of the printer user can apply these steps and attach HP Printer to macOS.

  1. Choose the ‘File’ option and followed by the selection of the ‘ Print’ option. 
  2. Then select the printer pop-up menu and then select the nearby printer or printer scanners preferences.
  3. The final step for this is to choose your printer and in case you cannot find your printer in options, you can apply a more advanced solution for the same.
  • Addition of network printer by IP address

Another advanced is to connect as IP Printer. But you must take care of the point that the printer must support the printing protocols such as AirPrint, HP JetDirect, Line Printer Daemon, or Internet Printing Protocol. But users must in mind that some printers give restrictions and support only limited functionality because of the usage of generic protocols.

Users must also use a particular queue and queue name for the addition of a printer in MAC. It also uses the printer’s IP address or hostname, printing protocol, model number, or the printer software name to complete the process.  The user must also check the status of the printer and ensure compatibility with macOS. But in case you are facing any technical issue, you can contact Canon support and talk to an IT expert and have a quick solution for the same. Now the users can choose any to have the best result and happy printing.