How to Fix a Netgear Router that is not connecting to the Internet?

How to Fix a Netgear Router that is not connecting to the Internet?

Suppose you are preparing to work with your computer for some specific task, but the Netgear router is not working. You try to find appropriate reasons behind this issue before moving towards solutions. But you get frustrated and depressed because you can’t diagnose it. To resolve it quickly, you can take expert guidance by getting in touch with the Netgear customer service team, and one of its technical experts will provide you with appropriate tips.

How to Connect a Netgear Router to the Internet?

First of all, configure your router accurately. Attach it to the power source and tap the power button if it doesn’t switch on automatically. The router’s name must appear in your Wi-Fi settings. Choose the network to connect and then type its correct password.

Why Does Netgear Router Not Connect to the Internet?

You can connect to other devices through a router without using a modem, but you should have a modem and internet service provider to access the Internet. Confirm that you have configured the modem correctly and securely connected to your router’s yellow port with an ethernet cable. Suppose you have connected to your wireless network but can’t access the Internet, then you need to diagnose your modem.

If you’re not connected to the router’s network, it happens because of the following reasons.

  • Intervention from physical objects
  • Incorrect or changed password
  • Outdated router’s firmware
  • Hardware problems such as faulty antenna or capacitor
  • Incorrect IP address

What Are the Troubleshooting Steps to Connect Netgear Router to Wi-Fi?

Whatever issues you have, go through some general troubleshooting tips.

  • Resume your router – Disconnect the power supply, wait for 30 seconds, and plug it back in. An easy restarting process will eradicate the momentary misadventures.
  • Move the router more nearer – Physical objects can restrict the wireless signal. Other electronics can cause interference, so position your router in a central position from every object. Suppose your router’s signal can’t reach every intersection of your homes, then go to wireless extension.
  • Update your router’s firmware – Suppose your router’s in-built software is outdated; you may face issues. Navigate your model on the Netgear website to get the most upgraded firmware.
  • Change the antenna – Either internal or external, all routers require an antenna to perform appropriately. Suppose your router has a damaged antenna; get a replacement online.
  • Amend your router’s IP address – If your default gateway IP address has been changed, replace it with the default.
  • Reform the Wi-Fi Channel – Suppose your Internet is slow, your router assigns various devices to a single wireless channel. Try to distribute them between two channels by selecting the excellent wireless channel for each device.
  • Initialize your router – Reset your router when it has been taken out of the box. You will lose custom preferences when you configure. A reset would be the only alternative. After the reset, sign-in to your modem with the default username and password.
  • Move to DNS Servers – Access the web if your DNS server is offline or damaged. Connect with other DNS servers.
  • Repair your modem – Suppose you have tried everything, but you can have a hardware issue such as a damaged antenna.

What Lights Should Be On Netgear Router?

The power light on your modem must be of a solid color, usually green. The internet light and wireless light should be solid or blinking. The system can be different in the router-modem-connected unit. To rectify this problem quickly, dial the Netgear support number to troubleshoot it immediately.

How to Setup Wireless HP LaserJet P1102W?

How to Setup Wireless HP LaserJet P1102W?

HP LaserJet P1102W printer is one of the efficient and premier printers used for printing and scanning multiple documents, gifs, pics, etc. You will get detailed information through this write-up about configuring the HP LaserJet P1102W printer through a wireless network on Windows and Mac. To set up this printer quickly, take expert guidance through the HP customer service team.

Set Up HP LaserJet P1102W Printer on Windows

Follow the few procedures given below if you wish to configure the HP LaserJet printer on Windows through a wireless network.

  • First of all, turn on your Windows system and HP printer. Put it near to your system
  • Visit the official website of the LaserJet printer on your system and follow the steps to download the printer driver by pressing the Download button
  • Now access the downloaded file to begin the configuration process
  • Follow up the terms and conditions attentively and tick the box “I have reviewed and accept the agreements and settings”, and choose the easy install checkbox option. After that, press on the Next option
  • The next page will display the printer found opportunity. So, choose the HP LaserJet P1102W printer and tap the Continue option
  • Once the software is installed, the configuration will show up the printers it has searched. If your printer is not displayed, then press on My printer is not found the option and then press on Continue
  • Now choose Configure to print over wireless network option and press on Next
  • Now, the software and driver will start the installation
  • Directly connect your system to the printer through a USB cable
  • Once the printer connection is found, the installation process will carry on the wireless configuration utility. Choose next
  • When asked for the Wireless Discovery step, choose automatic to get the computer for wireless login credentials and then select next
  • Now the Wireless Network Credentials will be displayed, and the screen will show the same network. Choose your network and tap the next button
  • After that, your LaserJet printer P1102W will couple to the wireless network
  • Finally, take out the USB cable and choose the finish on your Windows system.

Configure HP LaserJet P1102W on Mac Through Wireless Network

Go through the below steps to configure HP LaserJet P1102W on Mac

  • First of all, switch on your printer and confirm that there is no error light blinking on your printer and it is in ready mode
  • Now, switch on your Mac system and link it to the wireless network and share it with your printer
  • Next, couple Mac devices to your printer using the USB cable
  • A window will be shown on the computer screen automatically. Read the terms and conditions carefully and accept the agreement by pressing on it. The software will be downloaded automatically for your printer
  • Once the software is installed, press on Apple and access System Preferences
  • Press on Printers and Scanners option
  • Then, press on Open Print and click the printer setup button
  • Now press on utility and settings button and press on open print utility button
  • Press on HTML configuration in the next window
  • After that, press on the Networking button and choose Wireless under IPV4 configuration
  • Now change the status disabled to enabled under wireless section
  • Now go to the previous page and choose your shared network under Network Name SSID and then press on two arrows on the left-hand side of the network
  • Select the Security mode and enter the network password and then press on Apply button
  • Again, return to the Printers and Scanners option and press on the + sign
  • Choose your HP LaserJet P1102W printer in the window and printer name and press on Add button
  • Lastly, it is set up on Mac and ready to print.

Once you follow the above instructions carefully, you can configure the HP LaserJet printer on Windows and Mac. Suppose you can’t do it; call the HP support number to set it up quickly.

How to Set Up SBCGlobal Mail on MS Outlook?

How to Set Up SBCGlobal Mail on MS Outlook?

Outlook is an excellent email program that Microsoft introduced. It allows you to set up more than one email account. So it would be challenging to manage two or three email accounts simultaneously. With this write-up, you will find all the required information about setting up an SBCGlobal email to Outlook. SBCGlobal is a noticeable and eye-catching email service, but it has lost its prominence after merging with Yahoo email. Suppose you have already used SBCGlobal email and now read this article and configure SBCGlobal to Outlook. To configure quickly, you must call the SBCGlobal customer support team to get appropriate solutions.

Troubleshooting Procedures to Setup SBCGlobal in Microsoft Outlook

To configure SBCGlobal email in Outlook, mention the address and the connection settings of incoming and outgoing mail servers. The address of the servers would change when SBCGlobal lost its presence, and this domain no longer remained usable. So, Outlook must couple and communicate with AT&T’s servers to find new messages in your mailbox and send the email.

Let’s move to the troubleshooting procedures that are given below

  • Start with accessing the “MS Outlook” application and press on the “File” tab. Press on the “Add Account” to begin the account setup
  • Tap on Manual Setup or Additional Server Types and press “Next.”
  • Now, the “Service Page”, then select “POP” or “IMAP”, and then press “Next.”
  • In the given text fields, type your “name” and “email address”, and from the “Account-type” drop-down menu, select “POP 3”.
  • Type in the “Incoming Mail Server” field, and type in the “Outgoing Mail Server” field. In the login information, re-type your email address in the “Username” text and mention the sign-in password in the “Password” field. Once you’re completed, press on “More Settings.”
  • Next, choose the “Outgoing Server” field and further choose “My Outgoing Server (SMTP) requires authentication” checkbox
  • Now, choose the Advanced tab and examine “This Server Requires An Encrypted Connection”, type “995” in the “Incoming Server POP3” field
  • Type 465 in the outgoing server field. From the drop-down menu, “Use the following type of encrypted connection” and choose SSL.
  • Click “Ok” and then press “Next” to begin the configuration of the mailbox. Press on “Finish” and then press “Close” to exit the wizard.

What are the Email Settings to Configure SBCGlobal in MS Outlook

To configure the SBCGlobal email account with Outlook, use the correct SBCGlobal email settings for Outlook. Go to the IMAP and SMTP settings that you should use.

IMAP Settings SMTP Settings 
IMAP Serverimap.mail.att.netSMTP
IMAP port993SMTP port465
IMAP securitySSL/TLSSMTP securitySSL/TLS
IMAP usernameYour full email addressSMTP usernameYour full email address
IMAP passwordYour SBCGlobal email passwordSMTP passwordYour SBCGlobal email password

Once you enter the above troubleshooting procedures, you can easily configure SBCGlobal email to Outlook. If you can’t find it perfect for configuration, you must dial the SBCGlobal support number to get appropriate solutions.