To Enable Port Forwarding on Netgear, you can dial our given toll free number. Your Netgear Nighthawk router has a firewall that prevents your home network from unauthorized access. It blocks all the connections that were opened for a game or some other application.

Dial Toll Free Number : +1-855-362-0770

An Overview of Netgear Nighthawk Router

The procedure in which a port is opened is called Netgear Nighthawk port forwarding because, in this process, you forward a port from the internet via a firewall and direct it to the device in your home network. If you can’t able to enable the port on the Netgear nighthawk router, you must call Netgear customer service to resolve it quickly.

Steps to Enable Port Forwarding on Netgear Nighthawk Router

• Configure an IP address on your computer or device on which you wish to forward a port.
• Log into your Netgear Nighthawk R7000 router.
• Move to the port forwarding section.
• Click on the link of advanced.
• Now, select the link of Advanced Setup.
• Choose port triggering or port forwarding.
• Press on the radio button of port forwarding.
• Then, click on the button of Add Custom Service.
• Make a forward port entry.

Some Other Procedures to Enable Port Forwarding on Netgear Nighthawk Router

It looks so difficult, but there is nothing to worry about. Furthermore, we will help you walk through all the steps you need to perform for Netgear port forwarding.

Solution – 1: Set Up a Static IP Address

It is imperative to set up a static IP address in the device to which you are going to forward a port. Hence, This procedure will make sure that all your ports are open even after restarting the device.

Once you are done setting up the static IP address, the next thing that you need to do is to log into your router.

Solution – 2 : Login to Netgear Nighthawk R7000 Router

Now, you are going to log into your Netgear Nighthawk R7000 router. Your router has an interface that you can use to access the settings of your router. First, access the internet browser of your choice and then enter your router’s IP address in the location bar.

The default Netgear Nighthawk IP address is 172.16.0.1. If you changed your router’s IP address, you need to enter that IP address. After entering the IP address in the URL section, then click on the search icon.

After that, a dialogue box will appear before you, where you will be required to enter the username and password of your router. The default username of your Netgear Nighthawk R7000 router is admin, and the default password of your Netgear Nighthawk R7000 router is password.

Please enter the username and passwords in their respective fields and then click on OK. Finally, you will be able to log into your Netgear Nighthawk router.

Solution – 3 : Enable Port Forwarding

Furthermore, to enable port forwarding on the Netgear Nighthawk router, start searching for the port forwarding section of your router. For this, you will have to open the Netgear Genie page.

Select the Advance tab that is available right after the Basic tab. Take a look at the sidebar on the left. Select the option of Advanced Setup. This selection will open up the new menu. Now, select the option of Port Triggering or Port Forwarding.

Conclusion

Finally, move ahead and put a dot in the radio button labeled as port forwarding, close to the top of the page. After that, click on the control of Add Custom Service given at the end of the page. After moving through the above rectifying procedure, you must dial the Netgear technical support team to access it immediately if you can’t connect to the Netgear nighthawk router.