If the Sage software installed on your system cannot connect with the server, then you need to resolve the issue so that you can continue your work. The solution to this error requires the knowledge of networking; that is why you should connect with the Sage customer support number to speak with the experts. These professionals have all the required knowledge that is needed for fixing the error where Sage cannot connect with the server.

Why Can Sage not Connect with the Server?

If you are thinking about the reasons that are responsible for the error where Sage software cannot connect with the server, then those are listed below:

• Issues in the DNS of the network.
• Firewall Security can be responsible for the occurrence of the error.
• If the port, IP address, and server name are incorrect, then the error can arise.
• Due to the corruption of the session.pvk.

Steps to Solve Unable to Connect to Server Error

Before you begin solving this issue, you need to make sure you have created the backup as then your data will be safe. The steps that you have to follow for fixing the issue are given below:

Check that you entered the correct IP address and the server name during the setup of the workstation.

• Go to the “..\MAS90\Launcher” folder present on the workstation.
• Now open the file Sota.ini.
• Then you have to locate the section of [Servers]. You can see the IP address or server name that is listed after the following text: “1=.”
  Example: 1=ServerName;10000;APS=SAGE;APPLICATION=Sage100 ERP;Path=\\ServerName\ShareName\MAS90
• If the IP address or server name is wrong, then you can enter the correct Server Name or IP address. You can even uninstall and then reinstall Workstation.
• You have to check to see whether the port is open and is not blocked by a firewall.
• You have even had to check that the IP address or server name and port are entered correctly in the icon properties or not.
• Right Click on the Sage 100 ERP workstation client icon and select the option of properties.
• Now you have to confirm the server name or IP address and port are correct in the Target or not.
• Once the IP address, server name, and port are verified correctly, then you can see the message that says Outbound and Inbound Rule has not been created for the Sage 100 that too under the Windows Firewalls Advanced Security.
• It would be best if you opened the Administrative Tools and then Windows Firewall with Advanced Security console.
• Select the option of Inbound Rules> New Rule > Port > Next.
• You have to select Specific Local ports and enter the port number for your Sage 100 software and then click Next.
• Now choose to Allow Connection and press Next
• Then choose the option of Domain, Private, Public, and click Next,
• You can give a new name to the new rule selected by you, and don’t forget to add a description which can help you to identify the rule.
• Click on the Finish action.
• Now create the new Outbound Rule by following the steps given above.

You can even reach out to Sage helpline number to speak with the experts if the problem still persists. The certified technicians will make sure to resolve the issue faced by your easily, and this number stays accessible round the clock to help Sage users.

A fast and smooth internet connection is a top priority for many businesses and individual users because in the digital age a lot of work is done online. When your internet is down even for a few minutes it can be quite a frustration. However, if you are a Netgear user and if you find that your router does not work, you do not need to panic because you can contact the Netgear customer service for assistance. You will be able to get detailed steps on how to fix the problem and get your internet back in no time. You can also have a look at the troubleshooting steps in this blog to get a better idea about how your router works and what you can do to fix it in case you encounter an error.

Simple Tips to Fix this Error

One of the primary reasons why your Netgear router stops working or crashes is because there is a problem with the internet cables or Netgear network settings. On the other hand, another common reason why the router does not work is that the Netgear Router Driver is not updated. When you find that the router suddenly stops working you can go through the basic troubleshooting steps mentioned below to resolve the issue:

• Check all the access points and the Netgear router cables.
• Make sure you followed the correct adapter installation process.
• Access the router settings and ensure the adapter is enabled.
• Open a command prompt and review the IP address.
• Ensure you are using the correct IP address on your PC as well.
• Reboot the computer and the router and then open your browser.
• Check if you entered the proper security key when you logged in.
• Disable the security settings on the router and try connecting.
• Turn off the wireless function try connecting the router to your PC using an Ethernet cable.

In case the router still does not work, even after you whet through all the steps mentioned above, you should see if you can implement a more advanced solution. One solution is to perform a factory reset on your Netgear router so that you can start from scratch. However, the drawback of this option is that you may lose your saved settings. If you want to know how to reset the router you can call the Netgear support number and speak to a certified expert or a trained technician to get a detailed step-by-step guide. Netgear experts are available 24 hours a day to give you the best and simplest solutions for any error connected to your router.

Are you witnessing the sign-in error while accessing your SBCGlobal Email account? If yes, then you don’t have to worry as this issue can arise because of many reasons. However, resolving the sign-in error in SBCGlobal email is very easy as you can follow the steps mentioned below in this blog. You can even call SBCGlobal technical support number to speak with the customer care experts who will resolve the error efficiently.

SBCGlobal Helpline : 1-833-432-7769

Common Sign-in Error in SBCGlobal Email

Some of the most common sign-in error that you will face while accessing SBCGlobal Email are:

• Unable to sign-into your SBCGlobal Email account.
• The password of SBCGlobal email is not working.
• Forgot the password of the SBCGlobal email account.
• Unable to sign-in because the SBCGlobal email account is blocked.
• Forgot the SBCGlobal email address.
• SBCGlobal Email is not opening even after entering the correct password.

Steps to fix Sign-in Error in SBCGlobal Email

For fixing the signing error in the SBCGlobal Email, you need to follow the steps mentioned below:

• First, you need to check that you have active and stable internet connectivity.
• Make sure that the browser and the device, which you are using are compatible with the SBCGlobal Email.
• If you dint remember the password of your account, then you can reset it by using the recovery phone number, email address, and by answering the security question.
• You can even remove the junk and temporary files from your system and device as they may be causing the problem.
• Make sure other software is not blocking your way of accessing your email.
• Scan your system for any malware and spyware as they may be a real problem.
• Even check to see you are using the updated browser and device for accessing the email.

If the error persists then you can reach out to experts by calling SBCGlobal customer care who is available 24*7 round the clock. The professionals will hear your issue and then will give you the best solution so that you can fix the error at hand.

Netgear Phone Number : 1-844-411-4921

Every day millions of people all around the world suffer because of the loss data on account of hackers or viruses. When it comes to online security and virus protection you cannot afford to take any chances and you cannot afford to let your guard down. Since you should be able to deal with online threats as soon as possible, the McAfee support number is available on call, 24 hours a day to resolve any issue or query. Another way McAfee ensures uninterrupted security is through the auto renewal feature. However, this feature can be a pain if fees from being taken from your credit card at the wrong time. This blog will give you details on how to cancel your McAfee subscription and stop the charges. Keep in mind, even after you cancel your software subscription you can still use the software until the current subscription period is over.

Steps to Cancel McAfee Subscription and Get Refund

Since internet security and virus protection is ongoing the Auto-Renewal feature is specifically designed to renew your McAfee product subscription so that it runs without interruption. However, if you need to stop or cancel the subscription you can refer to the steps given below to complete the process:

Step 1: Open your internet browser and go to the McAfee homepage.
Step 2: Go to the top left corner and click on the ‘My Account’ option.
Step 3: Log in with your email ID and password registered with McAfee.
Step 4: Click on the ‘Auto-Renewal Settings’ and press the blue button.
Step 5: Press the ‘Yes, Turn it Off’ option to confirm your action.

After you turn off the auto-renewal option your McAfee subscription will be cancelled automatically once your current plan expires. If you need to renew your subscription once again you can go back to the ‘My Account’ section and follow the same steps. When you are renewing your subscription you can also review some of the other McAfee software packages available so that you get the best suited product.In case you have any trouble cancelling or renewing your subscription you can contact the McAfee customer service number and ask for help. Anti-virus experts and software technician s are available 24 hours a day to help you troubleshoot any error related to your McAfee software. You will be able to get detailed guidelines on how to overcome different McAfee error so that your computer is safe at all times.

Is your Roku YouTube not working? Or are you having issues while streaming Roku YouTube? If your answer is yes, then you don’t have to worry as this error is the simple error that can be resolved quickly. After the recent software update in Roku, the old Roku player is not able to stream YouTube, and even Roku YouTube is not working. Users are having trouble while playing YouTube Channel on the Roku. If you want to fix this issue, you can refer to this blog as the steps mentioned here will help in resolving it. You can even take the assistance of the experts by calling Roku helpline number which remains accessible 24*7 round the clock.

Troubleshooting Tips to Fix Roku YouTube not Working error

You need to follow the below-mentioned steps for fixing the error when Roku YouTube is not working.

If the screen is lagging while playing video on YouTube then:

• You can try to change the display resolution of the screen
• You need to make it to standard, once you have tune other settings
• You need to visit the homepage of Roku and then click on Settings > Display Type
• Here all the display will work except the HD setting

Is your Roku causes error while tuning up YouTube? If yes, then try these steps to fix it:

• You first need to uninstall the YouTube app from your Roku.
• Then you have to restart the Roku player.
• Now you have to turn on the TV.
• You have to try accessing the channel store on your Roku Player.
• You have the option to select any channel from the list of most popular channels.
• Now you have to add YouTube on the Roku screen and try accessing it.
• Then you have to try accessing it on the different display resolution present on the Roku settings.

If the problem persists, then you need to get in touch with the Roku customer support number where professionals are available at all hours to guide you. The experts will first hear your issue, and then they will accordingly fix the problem at hand.

If the TurboTax updates are not working in the Windows and Mac system, then there can be many reasons for it. One can be due to poor and inactive internet connectivity or malicious malware and viruses. Even when the system is not up-to-date, then also, this error can arise. One can resolve the issue efficiently by following the steps mentioned in this blog, or you can even take the assistance of the TurboTax customer support number, where experts are available at all 24 hours.

Steps to fix TurboTax Updates Not Working on Windows

For fixing the issue where the TurboTax updates are not working on Windows, you need to perform the following steps:

• Turn on your system and check whether it is connected with an active internet connection or not.
• Now you need to open the TurboTax software.
• Click on the Online Menu > Check for updates.
• If the updates are available, then it will be downloaded.
• You need to wait for a few seconds so that the latest software updates can get installed.
• Check to see if you are witnessing any pop-up regarding the error or not.
• Now again click on the Online Menu> Update Preference.
• After choosing the preference of automatic update, click on the Save button.
• This will eventually configure your TurboTax, and then the software will be updated automatically.

Steps to fix TurboTax Updates Not Working on Mac

One has to follow the instruction as given below to resolve the update not working issue on the TurboTax installed on Mac.

• You need first to open your Mac system and then connect it with active internet.
• Now go to TurboTax icon and click to open it.
• Then click on the option of TurboTax Menu > Check for updates.
• You have to wait for sometime to get the updates downloaded on your Mac.
• Now you have to install these updates on your Mac.
• Once the updates are installed, you need to set the preference to automatic update.

You can refer this blog for solving the update error on your system, be it Windows or Mac. If at any point you find it challenging to execute the steps as mentioned above, then you can reach out to experts via TurboTax support number. The customer care team is available at all hours to fix the issue face by the users while updating the TurboTax software.

Netgear Phone Number : 1-833-432-7769

The digital age which is so popular lives on a fast and secure internet connection. Whether you are engaged in some kind of online business or if you just use the web for entertainment or communication, the last thing you want is for your Netgear router to freeze and stop working. Even though you can always call the Netgear helpline number and get immediate assistance, it will help if you could learn to troubleshoot some problems on your own. This blog will give you some simple solutions you can use in case your Netgear router freezes and the connection is broken.

Solutions to fix Netgear Router Keeps on Freezing/Crashing

Most Netgear routers tend to freeze or stop working because of a problem with the cable or the network settings on your device. Another possible reason is that the Netgear Router Driver has not been updated. However, regardless of the cause of the problem, here are some basic troubleshooting steps you can follow to resolve the issue:

• Ensure that the access point and router are configured and on.
• Check the Netgear router and adapter installation process.
• Go to the settings and make sure the network adapter is enabled.
• Open command prompt and check the IP address on the network.
• Check if you are using a proper IP address on your computer.
• Turn off the PC and the router and then restart your system.
• See if you entered the correct security key when connecting.
• Try disabling the security on the AP/router and connect again.
• Perform a factory reset on your Netgear router and try again.
• Turn off the wireless function and directly connect your computer to the router with an Ethernet cable.

In case you find that your router still freezes, even after you implemented the steps mentioned above, you should consider using a more advanced solution. You can contact Netgear contact number and speak to a qualified expert to get a detailed step-by-step guide on how you can rectify the problem. Experts are available 24 hours a day to give you the best and simplest solutions for any error connected to your Netgear router.

Mozilla Helpline Number : 1-866-285-2029

Giving fierce competition to Chrome and Internet Explorer, Mozilla Firefox is surely making a presence among the users around. It’s a highly used and preferred operating system in today’s world and is undoubtedly in the race. But despite its popularity and top-notch features, users tend to face few failed errors while using the operating system. One such error and the most common error is Secure Connection Failed Error in Firefox. This might frustrate while you are working, isn’t it? In order to overcome this issue and use it without any glitches, you can either follow the below-mentioned troubleshooting steps. And in case you are looking for and reasonable assistance, you can get on a call with the expert technicians at the Mozilla Firefox support number. They are there to support you 24*7.

Method 1: Check your Security Software for SSL Scanning

In all the operating system, there is inbuilt security software which comprises of a unique feature called SSL Filtering or SSL Scanning. This is surely a unique feature and designed to make sure that the user doesn’t visit a website that has an expired SSL certificate. In order to fix this glitch, the user need to visit the settings option of whatever security software they are using and try locating the SSL scanning feature into it. Once the box is marked unchecked and the scanning is disabled, the use can try visiting the website. In case the error isn’t solved, and the user is still tied up, the user should try using the next method.

Method 2: Try changing the SSL settings of your Firefox browser

• In the address bar of your Firefox browser, type the command – ‘About:Config.’
• Then a pop-up will come up with a warning message stating – ‘This might void the warranty!’, click on the tab saying – ‘I accept the risk.’
• Now when a search bar appears, type – ‘security.ssl.enable_ocsp_stapling.’
• Now a new dialogue box will appear stating – ‘True’. Just double-click on the value in order to change it to ‘False.’
• Now, try connecting to the website that you were trying to visit and check if the error has been fixed. In case not, you can follow with the next method.

Method 3: The proxy setting of your Firefox browser

• Go the ‘Firefox menu bar’ and navigate through the ‘Tool’ menu and just click on the ‘Option’ tab.
• A new page will show up, simply navigate to the ‘Advance Panel’ and click on the button that is labelled as ‘Network.’
• Now, in the ‘Connection Field’ click on the tab labelled as ‘Setting.’
• You will get a new pop-up stat in ‘Connection Setting.’
• Now, in the window, look for ‘Manual Proxy Connection’ and check if that is selected or not.
• In case it is selected, then that means you require to verify all the desired protocols field manually.
• In case it isn’t selected, then it is better to leave it as it is and close the Connection Setting Window.
• Finally, check if the SSL is installed properly or not. In case it is not configured correctly, then that might be a big issue.

In order to fix this error completely and once for all, it is better to take the help of the expert professionals by getting in touch with on the Mozilla customer service number. They are equipped with a piece of sound knowledge and are trained to deliver you the best possible solution.

Mozilla Helpline Number : 1-866-285-2029

If you are someone who is facing the issue Firefox crashing constantly, then you need to fix it quickly, so that you can use it again. Firefox seems to crash either because cache, and cookies data are abundant, or due to outdated driver and browser. You can fix this issue by reach out to Mozilla firefox support number which remains available at all 24 hours in a day.

Steps to Fix Firefox Keeps Crashing Error

Follow the below-mentioned steps to resolve the issue where Mozilla Firefox keeps on crashing:

Check Troubleshooting Message
There is an inbuilt event log in the Mozilla Firefox where all the troubleshooting information are given so that you can launch it to resolve the issue. For launching the troubleshooting,follow these tips:

1. First, you need to click on the Mozilla Firefox icon on your system to open it.
2. Then you have to click on the hamburger menu > Help >Troubleshooting Information.
3. Now you can see the crash report of the last three days and other technical information about your favorite web browser.
4. If you wish you can reset the Mozilla Firefox, as resetting will remove all the unnecessary settings.
5. You can click on the Refresh button to reset the browser.

Disable the Add-ons
Sometimes Mozilla Firefox is crashing because of the broken extension and if you are witnessing these errors after installing some add-ons. Then you need to disable it while starting the Firefox on Safe Mode.

1. Open the web browser Firefox.
2. Now you need to tap on the hamburger menu > Help>Restart with Add-ons disabled.
3. At last hit on the Press button again for the confirming it.

Remove the Mismatched Cache
Cache data is the data on your computer by websites so that they can load faster when you want to open it next time. Cache data is known for reducing the load time; however, there are times when mismatching in cache computing can lead crashing of the Firefox.

1. Open the Mozilla Firefox on your computer.
2. Then, you have to click on the Library icon > History> Clear Recent History.
3. You need to select the Time range from which time onwards you want to clear the History. Here chooses the option of Everything.
4. Now tick mark on all the boxes that are next to Data and History which you want to clear.
5. Now you need to click on the Clear Now button and then restart the web browser.

Update the Device Drivers
If you forget to update the device driver of your system, then it can be causing the problem of Firefox crashing. So, it’s your duty first to identify which driver is outdated and then update it:

1. Press Win and R key together to open the Run window.
2. Then enter the command devmgmt.msc to launch the Device Manager after entering Enter key.
3. You need to look for any available updates in the list displayed.
4. If no updates are available, then go and see the device driver.
5. Then right-click on each device to Update the Driver.

If even after applying these troubleshooting steps, the Mozilla Firefox still crashes then you need to take the assistance of the experts by calling Mozilla support. This number stays accessible 24*7 round the clock to help you in fixing the error.

SBCGlobal Helpline Number : 1-833-432-7769

Linking your SBCGlobal email account with your iPhone will help you stay connected with your email contacts and respond to urgent messages as soon as possible. However, if you do not set up your account correctly, or you do not use the correct email server settings, you will find that SBCGlobal does not work on your iPhone. To know the exact steps, you need to follow to sync your account you can call the SBCGlobal customer service number and speak to a trained software expert. You can also have a look at the settings and the steps mentioned in this blog to get a better idea as to what needs to be done in case SBCGlobal is not working on your iPhone.

SBCGlobal Email Server Settings

POP3 Email protocol

• Inbound server: inbound.att.net
• Inbound port: 994
• SSL: Yes
• Outbound server: outbound.att.net
• Outbound port: 465

IMAP Email protocol

• Inbound server: imap.mail.att.net
• Inbound port: 993
• SSL: Yes
• Outbound server: smtp.mail.att.net
• Outbound port: 465 or 587

Steps to Update SBCGlobal Email Settings on iPhone

If you find that SBCGlobal is not working on your iPhone, the most efficient way to solve the problem is to set up your account from scratch or update your email settings. You can refer to the steps below to verify and update your SBCGlobal email settings:

Step 1: Go to the settings menu on your iPhone and select ‘Preferences.’
Step 2: Click on ‘Account Information’ and choose your email account.
Step 3: Under the server settings, select ‘POP3’ or ‘IMAP.’
Step 4: Enter the username associated with your account and continue.
Step 5: If required, enter your SBCGlobal password or secure mail key.
Step 6: Check the incoming and outgoing mail server settings as given.
Step 7: Click the ‘Edit SMTP Server List’ option and check the ports.
Step 8: Press ‘Ok’ and open the ‘Advanced Tab’ to check the SSL authentication settings.

Once you verify that all the settings are updated, you can close the window and restart your iPhone to see if the issue is resolved. In case you still cannot access your email account you will need to call the SBCGlobal customer support number and ask for help. Certified experts will be able to identify the source of the problem and give you the best troubleshooting solutions to resolve the issue so that you can continue using your SBCGlobal email account. Qualified technicians are available 24 hours a day to solve a range of issues related to your SBCGlobal email account.