Where Do You Find the WPS PIN on HP Printer?

Where Do You Find the WPS PIN on HP Printer?

Wi-FI Protected Set-Up (WPS) pin is required to create a connection between a router, wireless printer and accessible devices, Wi-FI Protected Set-Up (WPS) pin is needed. You can establish a connection between router, wireless printer and accessible devices with WPS pin. Wireless Technology will help to take out a print from your HP Printer by sitting in any part of your home. WPS Pin is required to connect your wireless printer to your device. Create a connection between your printer and device through a wired or wireless network and start printing your documents hassle-free. Being a non-tech user, you must connect with HP printer technical support from the well-qualified techies to fix this issue.

When you wish to establish a connection between a wireless printer and router, you will be asked to find a WPS pin to set-up a wireless connection. This blog will provide you with two procedures to maintain a relationship between a wireless printer and device. Searching the WPS Pin is almost tough for all non-tech users. You have gone through various challenges while setting-up WPS connection between the router and wireless printer.

What are the Possible Methods to find WPS Pin on your HP Printer?

There are almost two methods to have Wi-Fi Protected Set-up connection in HP Printers. Anyone can connect to the Wireless HP Printer in two ways that are WPS Button and WPS Pin. You can connect your HP Printer with your operating system by following these two processes mentioned below.

1. Attach HP Printer and Operating Device Using WPS Button

  • Select HP Printer control panel or screen and then, press ‘Wireless’ or ‘Setting’ button.
  • Select the option ‘Wi-Fi Protected Set-Up’ and follow the on-screen instructions that are further displayed on your screen.
  • Search the WPS button and press it to create a connection between the printer and the operating device.
  • Once you have pressed WPS button then go to the printer and choose ‘Continue’ option.
  • Now, the connection is maintained, and your HP printer is ready to take out print.

2. Attach Your HP Printer With WPS Pin

  • Open HP Control Panel and press Wireless button and then next press Settings button
  • Touch the ‘Wi-Fi Protected Set-up’ and then follow on-screen instructions properly
  • You will get a Wi-Fi Protected Set-Up pin displaying on your screen
  • Open software for the wireless router and access it and type the WPS pin at the required fields mentioned inside.
  • Once the HP printer is set-up properly, install a printer driver by going to All Programs and next click at Printer Set-Up & Software and then, select the option ‘Connect a New printer’ on your PC.

Once you have followed the process and connection is well-established between the printer and your device, test the printer by taking out a print. If the link is not set-up, then check the network speed and connectivity. When everything is okay but not connection set-up, contact HP printer support number to remove this error permanently. It is available all the time 24/7 for your assistance. Maintain a proper connection between wireless HP printer and device with WPS pin. Follow the above steps and choose one of them to establish a connection between printer and device.

How to Fix an HP Printer Failure 0x6100004a?

How to Fix an HP Printer Failure 0x6100004a?

HP Printers are considered as one of the best printers that offer quality service to its users. Although it is a machinery device, few minor issues can be created while printing related software and hardware. HP Printer Failure Error code 0x6100004a is considered if there is any connectivity problem or stacks of paper attached in the carriage. It generally occurs if the Windows Operating System is corrupted. If you have the knowledge about the technical field, you can troubleshoot this error significantly. But, if you don’t, right now contact HP technical support team to avoid this issue and it is the most efficient method to get rid of such error frequently.

What are the Methods to Fix HP Printer Failure Error 0x6100004a?

There are various methods to eradicate this HP Printer Failure 0x6100004a Error Code and we are putting a few of these one by one below.

Method 1

  • First, you have to give a click on the “Start” Button available in Printer Menu.
  • The next process is to tap the “Control Panel” to open it
  • Now, click on the “Device Manager” to connect it with the Computer Screen
  • Then, click with the right button of the mouse on the “Wireless-Network Connect Adaptor” to identify the issue
  • Now go to the “Properties” option to check the status of your driver
  • You can check the details of your HP printer, it is displaying well, then it is working properly
  • If it is not, then tap on the “Driver” to check the details of your driver.

Further. You can Uninstall Driver, Roll Back Driver, Disable Driver, or Update Driver, to troubleshoot the error. If the above method is not Ok, then follow the next procedure.

Method 2

  • First, you have to click on “Start Button” and type Device Manager in the Search box and tap on it.
  • Now, choose the category of the device on which you wish to install the Driver and just give a double-click on it.
  • Click on the “Update Driver Software” option with the right button of the mouse on the device.
  • Now, choose the term “Browse My Computer for Driver Software” on the new appearing window
  • Then, you can view the lists of device drivers available on your computer
  • Install the Device Driver ending with “Legacy”
  • At the last, tap the “Next” button

If this method is also not suitable to terminate the following Error Code 0x6100004a HP Printer Failure, then look for the next procedure given below.

Method 3
Sometimes, the paper jam could be one of the issues of creating such type of error code 0x6100004a. So, fix the paper jam problems by using the below steps.

  • First, try to open the document feeder or roller for paper jammed issue
  • Now, remove the Power Cord as soon as you have made the Printer “ON”
  • Open the printer carriage access door and look for any jammed paper stuck in it
  • If any paper is stuck to it, remove it immediately from the carriage
  • After this, clean the paper feeder roller to remove the dust and paper fibber
  • Eventually, put the Power Cord by resetting the printer and apply for the job.

If the above-mentioned procedure is not helpful, then contact the team of Engineers to eradicate the HP Printer Error Code 0X6100004a Failure as soon as possible. It will be a hassle-free method to terminate such Printer Failures.

How to Install an HP Printer without the CD?

How to Install an HP Printer without the CD?

A printer driver is just software that acts as a medium of communication between your computer and your printer, and specific devices do not have in-built printer drivers. If you are a Mac or Windows user looking to connect your HP Printer you may have to check online to download the printer driver software so that you can use your printer without any errors. The problem is that different operating systems and different printers use different printer drivers. This article will give you a general overview of the steps involved when you install an HP Printer driver. For a more detailed step-by-step guide to installing HP Printer drivers, you can call the HP printer customer service number and speak to a trained technician who will be able to provide you with additional tech support.

Steps to Install an HP Printer Driver without the CD

To download the correct HP printer driver, you need to know the correct printer model you are using. Once you identify the correct printer driver, you can follow the steps given below to install it on your device:

  • Select the Apple or Windows icon on the main screen and navigate to the system preferences or Settings, respectively.
  • Then you need to select the ‘Print and Scan’ or ‘Devices > Printer & Scanner’ option and open the list of devices.
  • Go through the list of printer and search for your HP Printer
  • If the name of the printer appears on the screen, click on the small minus sign beside it and delete the existing driver.
  • Once your HP printer is deleted, select the plus sign
  • Select ‘Add Printer or Scanner’ and click on the name of your HP Printer
  • Go to the next page, click on the ‘Print using’ option, and select your HP printer model.
  • Click on the ‘Download and Install’ to get the relevant printer driver on your device.
  • When the installation of the printer driver is complete, close the window and reboot your system.

When your system turns on, give the command to your printer to print a test document to make sure that your printer driver is installed correctly. If you see any errors in the HP printer or if you could not complete the installation steps correctly. Then you can call the HP customer care number and reach out to a certified expert who can give you proper guidance so that you can finish setting up the printer.

How to Fix HP Printer Spooler Error?

How to Fix HP Printer Spooler Error?

If you see an error message that says “Print Job Stuck on Queue,” then it is possible that the print spooler service is not running and the operation could not be completed. HP Printer Spooler Errors generally occur when a user is trying to uninstall or reinstall the printer driver. These errors can also occur when you trying to print a document or access the printer properties. This blog will give you a brief overview of the steps you need to follow to fix common HP Printer Spooler Errors so that you can carry on with your printing tasks. Since the steps can be a little technical you should call the HP printer phone number and speak to an expert before you attempt to fix the spooler error.

Process to fix HP Printer Spooler Errors

Spooler error occurs because of a technical issue with the SPOOL.SVC operating system. In simple terms, this is the software that carries files through the operating system for printing. The SPOOL.SVC operating system needs to be active for you to be able to print or access the functions on your HP Printer.

The SPOOL.SVC file usually starts automatically as soon as you turn on your Windows device. If you find that the program is stuck you can try using the steps mentioned below to start the service again:

Step 1: Restart your Windows device and click on the ‘Start’ menu.
Step 2: Go to the ‘Files and Folders’ section and right-click ‘My Computer.’
Step 3: Select the ‘Manage’ option and proceed to the next step.
Step 4: Go to the left column and double click ‘Services and Applications.’
Step 5: Navigate to the ‘Services’ section and the ‘Print Spooler’ option.
Step 6: Highlight the spooler option on the list of Services.
Step 7: Click the ‘Start the Service’ button and check if the printer is working.

Keep in mind that the steps mentioned above should only be used for a Windows device. You should consult a customer service representative before you implement and solution. If you find that the spooler errors still occur and the spooler service cannot be started, then it is possible that there is a problem within the operating system itself. You can call the HP printer customer service phone number and consult an experienced software technician to fix the issue. Trained HP experts are available 24 hours a day to help you troubleshoot virtually any technical issue related to your HP device.

How to Change an HP Printer from Offline to Online?

How to Change an HP Printer from Offline to Online?

HP Printer is one of the most used printers that is used by people all over the world. Whether it is personal or professional work, you can use it to print your documents and images without any difficulty. The reason why this printer is successful is because of its amazing properties and features that make it stand apart from the rest of other printers. However, there are times when people face trouble while using these printers, and one such error is not able to change the offline mode of HP Printer to online mode. You can go through this blog to know the procedure, but if you don’t want to do it on your own, then you can reach out to experts via HP Printer support phone number. This number is available at all 24 hours, and users can reach out to them at all hours without any difficulty.

Change an HP Printer from Offline to Online

Your Operating system might recognize your HP printer is offline if your printer is not able to connect with your Windows. This problem can arise due to many reasons, and that is why it is important for you to know the reason why this problem arises in the first place. Here we will help you in changing the setting from offline mode to online mode without any difficulty.

  • Firstly, click on the start button present on your desktop and then click on the option of Devices and Printers.
  • Now right-click on the printer where it is showing offline, then tap on the option of See what’s printing.
  • Then click on the Printer link at the top of the window, and select the ‘Use Printer Offline’ option to eliminate the checkmark.
  • This will make your printer go online and ready for printing the documents.

If you are finding it difficult to do it on your own, then you don’t have to lose patience. You can call HP Printer customer service to speak with the experts who are available at all hours. The professionals will make sure that they resolve the query that the users of HP Printer are facing. You can reach out to them 24*7 round the clock within time and location constraints.

How to Fix HP Printer Install Failed in Windows 10?

How to Fix HP Printer Install Failed in Windows 10?

Are you not able to install HP Printer in your Windows 10 system? If yes, then you need to know that there can be an issue with the software or your printer because of which you witness this error. Installation failed error can be easily fixed by the experts that can be reached when you call on HP Printer customer support. This number stays available at all times and will let you connect with the professionals who will fix the issue efficiently so that you can get hold of your printer.

Steps to fix the Installed Failed Error of HP Printer

You need to follow the troubleshooting steps given below to fix the issue where installation failed error of HP Printer can be resolved:

1. Remove the printer from Devices and Printers
✔ You have to remove any icons of your printer from the folder of Devices and Printers.
✔ If you are connecting your HP printer to the computer by using the USB cable, then disconnect the cable from your printer.
✔ You need to turn the HP printer off and on again, to make sure that it is in a ready state.
✔ Now you have to search Windows for devices, and then you have to click Devices and Printers from the list of results.
✔ Then you have to right-click the printer of your printer, and then click on the tab of Remove Device. You need to follow the instructions to complete the removing process.
✔ If multiple icons exist for your printer, then remove them all.

2. Connect your printer to the computer
Before installing the built-in driver, you need to connect your HP printer to the computer or your wired or wireless network. There are three ways to connect your HP printer, and they are:

✔ USB connection to your computer
✔ Wireless (Wi-Fi) connection to your network
✔ Wired connection to your network.

3. Set Windows Update to download device driver automatically
✔ Open the Windows Device Installation Settings and then confirm that your system is set to download driver software automatically.
✔ In Windows, search and then open Change device installation settings.
✔ In the window of Device Installation Settings, you have to select Yes option, and then Save the Changes.

4. Install the HP printer driver
✔ In Windows, open Control Panel > Devices and Printers > Add a printer
✔ The new page will open where you have to choose your printer to add to your PC, then click Next to follow the on-screen instructions for installing the driver.
✔ Click Windows Update, and then wait for some time so that the print drivers for the update.
✔ Click HP and then click the name of your HP printer in the Printers pane.
✔ Check the name of your printer in the list, select it, click Next, and then follow the on-screen instructions to install it.
✔ When you are finished, the printer driver is set up and ready to use.

If the steps as mentioned above help you in fixing the failed installation error in Windows, then you call the experts. You can reach experts by calling HP Printer support number which stays available at all 24 hours irrespective of time and location constraints. They will hear out the error faced by you and then will give you the best possible solution.